Installation Videos & Guides

Cement board
Unpainted Brick, Block, CMU
DRYWALL IS NOT A SUITABLE SUBSTRATE

Recommended Setting Material: Polymer Modified Mortar

The Realstone System is a jointless, dry-stacked installation where panels and corners fit tightly together without grouted joints. A polymer modified mortar and full coverage is advised. Always follow your local building codes and best practices from TCNA.

Crafted stone installation is similar to that of tile. Please refer to the TCNA for proper installation techniques.

The adhesive should be applied to both the individual Antique Wood piece and installation surface with the double spread technique. For detailed installation instructions follow the directions provided by the manufacturers of the adhesives listed.Due to natural moisture absorption in wood products, an acclimation period is recommended. Carpentry or wood installation tools must be used, wet saw usage is not recommended. Use adhesive and small finishing nails for additional support. For detailed installation instructions follow the directions provided by the manufacturers of the adhesives listed

Due to natural moisture absorption in wood products, an acclimation period is recommended. Carpentry or wood installation tools must be used, wet saw usage is not recommended. Use adhesive and small finishing nails for additional support. For detailed installation instructions follow the directions provided by the manufacturers of the adhesives listed

During installation, handle tile with care to prevent marring the surface. Tempered Glazed tile is heat sensitive and not appropriate in areas where its surface will exceed the ambient room temperature. Standard tile installation is recommended. For best results, use polymer-modified mortar in white with full coverage and urethane grout.

Depending on the mounting, paper-faced or mesh-mounted, the installation and usage for our glass mosaics vary. Please review the installation guides and usage chart.